Optical Fibre Only

Nationally_Recognised_Training

ICTCBL302

Optical Fibre Only

This course will provide participants with the underpinning knowledge and skills to work with optical fibre telecommunications cabling.

By completing this course, learners will gain the necessary specialist competency (previously known as endorsement) to undertake optical fibre cabling work.

The Australian Communications and Media Authority’s (ACMA) new cabling provider rules require technicians undertaking optical fibre cabling work to complete this competency.

This is an open registration endorsement only.

Pre-Requisites:

Learners with an Open Cabler Registration qualify to receive the coaxial cabling specialist competency (endorsement).

Course Duration:

Two day Course

Course Dates:

Brisbane – Rocklea Campus

Please select the following link for course dates

http://www.electrogroup.com.au/new-course-dates-2019-2020/

Rockhampton Campus

TBA

Course Fee:

$298 If you are Eligible for CSQ Funding- while available (CSQ willl fund $202)
$500 Full Fee – If you are NOT Eligible for Funding

 

 

Fee is calculated through a Construction Skills Queensland (CSQ) funded subsidy of $202. Conditions apply to eligible applicants. Go to https://www.csq.org.au/search/courses?id=49&v=72 for more information on eligibility requirements

Sign up now

CSQ Enrolment Form SCG V4.2

Training Enrolment Form (NON FUNDED)

What competencies will be delivered in the course?

Core Units

ICTCBL302 Install and terminate optical fibre cable on customer premises

*Students will complete with a statement of attainment

Certificate IV in Electrical – Photovoltaic Systems

Nationally_Recognised_TrainingUEE42011

Certificate IV in Electrical – Photovoltaic systems

This course provides licensed electricians with the skills to design, install, set up, test, fault find, repair and maintain grid-connected photovoltaic systems and associated solar equipment. Attendees at the end of this course will be able to apply to become an Accredited Designer and Installer with Clean Energy Council Australia. The course is designed for qualified Electricians with a current electrical licence. You will be required to complete additional work in your own time on top of your face to face attendance to achieve this Certificate.

Pre-Requisites:

It is essential that anyone undertaking this skill set already holds the Competency Standard Unit:

UEENEEG105A Verify compliance and functionality of low voltage general electrical installations

OR

A current unrestricted electrical licence issued in an Australian State or Territory.

Ideally, all applicants will have over two years of relevant industry experience which will be qualified through phone interviews pre-admission. Exceptions may be made in consultation with site supervisors.

Students will also need to complete pre-work before attending college.

Course Duration:

Ten days on campus (plus additional work in your own time)

Course Dates:

Brisbane – Rocklea Campus

Please select the following link for course dates

http://www.electrogroup.com.au/new-course-dates-2019-2020/

Rockhampton Campus
TBA

Course Fee:

$499 co-contribution fee*
$199 concessional co-contribution fee*
$6,800 full fee for funding non-eligible students

*This course is funded by the Queensland Government Higher Level Skills program which is a component of Certificate 3 Guarantee and concessions may be available for eligible students at the time of enrolment. To find out more visit https://www.qld.gov.au/education/training/subsidies/pages/higher.html for eligibility requirements

Program fact sheets

3. Higher Level Skills RTO fact sheet PDF, 289KB
4. Higher Level Skills employer fact sheet PDF, 287KB
5. Higher Level Skills student fact sheet PDF, 288KB

Concession

You are eligible for the concession price of a course if you meet the eligibility requirements under the subsided costing and:

  • hold or are listed on an Australian Government Low Income Health Care Card or Pensioner Concession Card
  • are Aboriginal or Torres Strait Islander
  • have a disability.

You will need to provide evidence at the time of enrolment.

 Sign up now

Government Funded Enrolment – Solar

What competencies will be delivered in the course?

Core Units

UEENEEE101A    Apply Occupational Health and Safety regulations, codes and practices in the workplace

UEENEEE102A    Fabricate, assemble and dismantle utilities industry components

UEENEEE104A    Solve problems in d.c. circuits

UEENEEE105A    Fix and secure electrotechnology equipment

UEENEEE107A    Use drawings, diagrams, schedules, standards, codes and specifications

UEENEEE137A    Document and apply measures to control OHS risks associated with electrotechnology work

UEENEEG006A   Solve problems in single and three phase low voltage machines

UEENEEG033A   Solve problems in single and three phase low voltage electrical apparatus and circuits

UEENEEG101A   Solve problems in electromagnetic devices and related circuits

UEENEEG102A   Solve problems in low voltage a.c. circuits

UEENEEG103A   Install low voltage wiring and accessories

UEENEEG104A   Install appliances, switchgear and associated accessories for low voltage electrical installations

UEENEEG105A   Verify compliance and functionality of low voltage general electrical installations

UEENEEG106A  Terminate cables, cords and accessories for low voltage circuits

UEENEEG107A   Select wiring systems and cables for low voltage general electrical installations

UEENEEG108A   Trouble-shoot and repair faults in low voltage electrical apparatus and circuits

UEENEEG109A   Develop and connect electrical control circuits

UEENEEG063     Arrange Circuits, controland protection for general electrical installations

UEENEEE038B   Participate in development and follow a personal competency development plan

UEENEEG171A  Install, set up and commission interval metering

UEENEEK125A  Solve basic problems in photovoltaic energy apparatus and systems

UEENEEK135A  Design grid connected photovoltaic power supply systems

UEENEEK145A  Implement and monitor energy sector environmental and sustainable policies and procedures

UEENEEK148A  Install, configure and commission LV grid connected photovoltaic power systems

UEENEEE117A  Implement and monitor energy sector OHS policies and procedures

UEENEEE124A  Compile and produce an energy sector detailed report

Electives

UEENEEC001B     Maintain documentation

UEENEEC002B     Source and purchase material/parts for installation or service jobs

UEENEED101A     Use Computer applications relevant to a workplace

UEENEEC003B     Provide quotations for installation or service jobs

UEENEEG122A    Conduct compliance inspection of single phase LV electrical installations

UEENEEG123A   Conduct compliance inspection of LV electrical installations with demand exceeding 100 A per phase

*Students will complete with a Certificate and statement of attainment

Sustainable Designer-Installer of Grid Connected Photovoltaic (Solar Power) Systems (Skill Set)

Nationally_Recognised_Training

Sustainable Designer and Installer of Grid Connected Photovoltaic (Solar Power) Systems

This course provides participants with the knowledge and skills to design and install grid-connected photovoltaic systems.
Participants will learn about the set-up, design and placement of photovoltaic systems as well as applicable standards and guidelines, metering, connecting a grid connect inverter and the completion of associated installation documentation.
This course is delivered in simulated conditions where participants are required to complete theory assessments, system design and inverter assignments as well as a final assignment that is to be completed post course. You will be required to complete additional work in your own time on top of your face to face attendance to achieve this Statement of Attainment.

Pre-Requisites:

It is essential that anyone undertaking this skill set already holds the Competency Standard Unit:

UEENEEG105A Verify compliance and functionality of low voltage general electrical installations

OR

A current unrestricted electrical licence issued in an Australian State or Territory.

Students will also need to complete pre-work before attending college.

Course Duration:

Six day on campus attendance

Course Dates:

Brisbane – Rocklea Campus

Please select the following link for course dates

http://www.electrogroup.com.au/new-course-dates-2019-2020/

Rockhampton Campus

TBA

Course Fee:

$1,720 – If you are Eligible for CSQ Funding- while available (CSQ will fund $780)

$2,500 Full Fee – If you are NOT Eligible for Funding

 

 

Fee is calculated through a Construction Skills Queensland (CSQ) funded subsidy of $780. Conditions apply to eligible applicants. Go to http://www.csq.org.au/search/courses?id=49&v=72 for more information on eligibility requirements

Sign up now

CSQ Enrolment Form SCG V4.2

Training Enrolment Form (NON FUNDED)

What competencies will be delivered in the course?

Core Units

UEENEEK125A Solve basic problems in photovoltaic energy apparatus and systems

UEENEEK135A Design grid connected photovoltaic power supply systems

UEENEEK148A Install, configure and commission LV grid connected photovoltaic power systems

*Students will complete with a statement of attainment

Certificate IV in Hazardous Areas — Electrical

Nationally_Recognised_TrainingUEE42611

Certificate IV in Hazardous Areas — Electrical

This course is designed to give participants knowledge and practical skills for installing and maintaining electrical equipment in hazardous areas. The course covers competencies in the installation, maintenance and testing of equipment in hazardous areas as well as procedures to attend to breakdowns. You will be required to complete additional work in your own time on top of your face to face attendance to achieve this Certificate.

Pre-Requisites:

Must be a holder of a Nationally Recognised Unrestricted Electrical license OR an Instrumentation trade Certificate III in Instrumentation and Control. If you have previously completed Certificate IV in Electrical—Instrumentation, units may be credited to the Certificate IV Hazardous Areas Electrical. Please Contact us to discuss these options. An entry requirement is that participants must hold a current unrestricted electrical license.

Students will also need to complete pre-work before attending college.

Course Duration:

Five day on campus attendance (plus additional work in own time)

Course Dates:

Brisbane – Rocklea Campus and Rockhampton Campus

Please select the following for course dates

http://www.electrogroup.com.au/new-course-dates-2019-2020/

Course Fee:

$200 – If you are Eligible for CSQ Funding- while available (CSQ will fund the remaining $1,500 while available)

$1,700 If you are NOT Eligible for CSQ Funding

 

 

Fee is calculated through a Construction Skills Queensland (CSQ) funded subsidy of $1, 500. Conditions apply to eligible applicants. Conditions apply to eligible applicants. Go to http://www.csq.org.au/for-current-workers/higher-level-skills for more information on eligibility requirements.

Sign up now

CSQ Enrolment Form HLS V4.2

Training Enrolment Form (NON FUNDED)

What competencies will be delivered in the course?

Core Units

UEENEEE038B Participate in development and follow a personal competency development plan

UEENEEE101A Apply Occupational Health and Safety regulations, codes and practices in the workplace

UEENEEE102A Fabricate, assemble and dismantle utilities industry components

UEENEEE104A Solve problems in d.c. circuits

UEENEEE105A Fix and secure electrotechnology equipment

UEENEEE107A Use drawings, diagrams, schedules, standards, codes and specifications

UEENEEE117A Implement and monitor energy sector OHS policies and procedures

UEENEEE124A Compile and produce an energy sector detailed report

UEENEEE137A Document and apply measures to control OHS risks associated with electrotechnology work

UEENEEG006A Solve problems in single and three phase low voltage machines

UEENEEG033A Solve problems in single and three phase low voltage electrical apparatus and circuits

UEENEEG063A Arrange circuits, control and protection for general electrical installations

UEENEEG101A Solve problems in electromagnetic devices and related circuits

UEENEEG102A Solve problems in low voltage a.c. circuits

UEENEEG103A Install low voltage wiring and accessories

UEENEEG104A Install appliances, switchgear and associated accessories for low voltage electrical installations

UEENEEG105A Verify compliance and functionality of low voltage general electrical installations

UEENEEG106A Terminate cables, cords and accessories for low voltage circuits

UEENEEG107A Select wiring systems and cables for low voltage general electrical installations

UEENEEG108A Trouble-shoot and repair faults in low voltage electrical apparatus and circuits

UEENEEG109A Develop and connect electrical control circuits

UEENEEK145A Implement and monitor energy sector environmental and sustainable policies and procedures

UEENEEM080A Report on the integrity of explosion-protected equipment in a hazardous area

Electives

UEENEEM039A Conduct testing of hazardous areas installations – gas atmospheres

UEENEEM040A Conduct testing of hazardous areas installations – dust atmospheres

UEENEEM041A Conduct testing of hazardous areas installations – pressurization

UEENEEM042A Conduct visual inspection of hazardous areas installations

UEENEEM044A Conduct detailed inspection of hazardous areas installations – gas atmospheres

UEENEEM045A Conduct detailed inspection of hazardous areas installations – dust atmospheres

UEENEEM046A Conduct detailed inspection of hazardous areas installations – pressurization

UEENEEM020A Attend to breakdowns in hazardous areas – gas atmospheres

*This course is dependent on enrollments. If the minimum of enrollment are not met, this course may be re-scheduled to a later date

*Students will complete with a Certificate and statement of attainment

Working Safely at Heights

                 

 

       RIIWHS204D

 

 

Working Safely at Heights

Work Safely at Heights one day course is designed for anyone who is required to undertake routine procedures involving working at height. The course is designed for students who work at height to a broad range of height risk situations and to correctly implement a safe working procedure. The successful student will be competent to work at height using applicable fall protective equipment.

Language Literacy and Numeracy as required to work safely at heights in the workplace and complete workplace documentation. Students must be physically capable of climbing a ladder safely maintaining three points of contact.

Pre-Requisites:

Not Applicable

Course Duration:

One day Course

Course Dates:

Please select the following link for course dates

http://www.electrogroup.com.au/new-course-dates-2019-2020/

Course Fee:

$15– If you are Eligible for CSQ Funding- while available (CSQ will fund $225) while available

$240 Full Fee – If you are NOT Eligible for Funding

 

 

Fee is calculated through a Construction Skills Queensland (CSQ) funded subsidy of $225. Conditions apply to eligible applicants.

Go to http://www.csq.org.au/search/courses?id=49&v=72 for more information on eligibility requirements

Sign up now

CSQ Enrolment Form SCC V4.2

Training Enrolment Form (NON FUNDED)

What competencies will be delivered in the course?

Core Units

RIIWHS204D – Work safely at heights

*Students will complete with a card and a statement of attainment.

Cardiopulmonary Resuscitation (CPR) & Low Voltage Switchboard Recuse (LVR) REFRESHER

Cardiopulmonary Resuscitation (CPR) & Low Voltage Switchboard Recuse (LVR) REFRESHER

Training and assessment of this essential skill set for all electricians and trades assistants. All students involved in electrical work which is required to maintain skill levels in low voltage rescue procedures as part of their duties. This CPR & LVR course is specifically designed to provide students with the knowledge and practical skills to perform a safe rescue of a casualty who has received an electric shock or other injuries while working on low voltage conductors or equipment (LVR).

The current Electrical Safety Act requires competency acquisition every 12 months.

Pre-Requisites:

A copy of your current CPR/LVR Card or Certificate/Statement of Attainment.

**Must have completed an initial CPR/LVR as this is a refresher course only.

Course Dates and Duration:

Rocklea Campus

Every Tuesday Afternoon

4:00pm Start (1-2 Hours)

Rockhampton Campus

The first Wednesday of every month (Please call our Rockhampton Office to organise a booking on 4291 0744)

Course Fee:

CPR/LVR $70

CPR ONLY $50

GROUP BOOKINGS AVAILABLE – Call us today to discuss group booking rate discounts.

Sign up now

Training Enrolment Form (NON FUNDED)

*Students will complete with a CPR/LVR Card for Refresher course

Testing and Fault Finding Refresher

Testing and Fault Finding Refresher

This a non-accredited industry course.

   This course will cover items such as

  • Testing mains when there is a broken neutral or reverse polarity Functional testing
  • Customer instructions
  • Earth and bonding points check
  • MEN checked at switchboard
  • Fault loop impedance test
  • Discussion of relevant legislation

* All practice testing is conducted in a realistic simulated environment Pre-Requisites:

All applicants must hold a current Full Electrical License

Course Location: 9 Railway Terrace, Rocklea

Course Duration: Approximately 6 hour course (7:30am start)

Course Dates:

For group bookings please call our Office on (07) 3274 6288. For individual bookings, please click on the link below for avilable course dates;

http://www.electrogroup.com.au/new-course-dates-2019-2020/

Sign up now:

Training Enrolment Form (NON FUNDED)

Course Fee:

Employees – $150 per person

*Students will complete with a Legislation Testing and Fault Finding Refresher card.

Construction Wiring Program (CWP)

Construction Wiring Program (CWP)

The course is intended for licensed electrical mechanics that work in the construction industry and perform electrical installations at construction and demolition sites. Participants will learn the minimum requirements for the design, construction and testing of electrical installations that supply electricity to appliances and equipment, and for the in-service testing of portable, transportable and fixed electrical equipment used on construction and demolition sites.

The course is designed to cover the requirements of Australian Standard AS/NZS 3012:2010, Electrical installations – Construction and demolition sites and relevant sections of referenced standards such as AS/NZS 3000 2018, Wiring Rules, and AS/NZS 2293 Emergency Lighting, AS/NZS 3017:2007 Electrical installations – Verification guidelines

.Pre-Requisites:

Not Applicable

Course Duration:

Two day Course

Course Dates:

Please select the following link for course dates

http://www.electrogroup.com.au/new-course-dates-2019-2020/

Course Fee:

$220– If you are Eligible for CSQ Funding- while available (CSQ will fund $180)

$400 Full Fee – If you are NOT Eligible for Funding

 

 

Fee is calculated through a Construction Skills Queensland (CSQ) funded subsidy of $180. Conditions apply to eligible applicants.

Go to http://www.csq.org.au/search/courses?id=49&v=72 for more information on eligibility requirements

Sign up now

CSQ Enrolment Form SCG V4.2

Training Enrolment Form (NON FUNDED)

What topics will be covered in this course?

  • Principles of AS/NZS 3000:2010
  • Legislative requirements
  • Installation of construction wiring
  • Switchboard construction, installation, control and protection
  • Lighting and Luminaires
  • Lift Shafts
  • Transportable Structures
  • Verification (Inspection and Testing)
  • Portable Generators
  • Inverters
  • Documentation
  • Flexible extension cords, cables and accessories
  • Earth Leakage Protection
  • Protection of Final Sub-Circuits
  • Periodic Inspection of Tools and Plant

*Students will complete with a card.

Appointment of Ms Donna Pickford as CEO of ElectroGroup

Appointment of Ms Donna Pickford as CEO of ElectroGroup

 

The Board of ElectroGroup are delighted to announce the permanent appointment of Ms Donna Pickford as the CEO of ElectroGroup.

 

Donna has extensive experience in managing a number of roles in various aspects of the business over the last 7 years. Prior to Acting as the CEO, Donna was in charge of Electro Group Apprentices and built a strong platform for apprentices and host employers within various sectors of the industry. Her outstanding relationship skills has made her an ideal choice to lead the organisation into the next phase of the business. Donna has been given a broad brush to identify the strategic strengths of the organisation and to continue to build the business based on the values of “excellence in training  and strong customer service within a culture of fairness and integrity”.

 

Donna has already provided a role model for all of the staff and apprentices to follow. Her diligence and hard work are beginning to pay off with the development of new post-trade courses as well as developing a strong compliance culture within the RTO. All host employers and industry stakeholders are encouraged to contact Electrogroup with any training initiatives or inquiries they might have.

 

ElectroGroup are committed to finding training solutions that marry the interests of employers with those of their apprentices and staff. Donna is well placed to promote the good work of the entire organisation and we look forward to seeing some of the exciting ventures she is already beginning to explore. Please join with me in congratulating Donna on a wonderful achievement.