Sustainable Designer-Installer of Grid Connected Photovoltaic (Solar Power) Systems (Skill Set)

Nationally_Recognised_TrainingUEESS00101

Sustainable Designer and Installer of Grid Connected Photovoltaic (Solar Power) Systems (Skill Set)

This course provides participants with the knowledge and skills to design and install grid-connected photovoltaic systems.
Participants will learn about the set-up, design and placement of photovoltaic systems as well as applicable standards and guidelines, metering, connecting a grid connect inverter and the completion of associated installation documentation.
This course is delivered in simulated conditions where participants are required to complete theory assessments, system design and inverter assignments as well as a final assignment that is to be completed post course. You will be required to complete additional work in your own time on top of your face to face attendance to achieve this Statement of Attainment.

Pre-Requisites:

It is essential that anyone undertaking this skill set already holds the Competency Standard Unit:

UEENEEG105A Verify compliance and functionality of low voltage general electrical installations

OR

A current unrestricted electrical licence issued in an Australian State or Territory.

Course Duration:

Six day on campus attendance

Course Dates:

Brisbane – Rocklea Campus

Please select the following link for course dates

http://www.electrogroup.com.au/new-course-dates-2018/

Rockhampton Campus

TBA

Course Fee:

$1,720 – If you are Eligible for CSQ Funding (CSQ will fund $780)

$2,500 Full Fee – If you are NOT Eligible for Funding

 

 

Fee is calculated through a Construction Skills Queensland (CSQ) funded subsidy of $780. Conditions apply to eligible applicants. Go to http://www.csq.org.au/search/courses?id=49&v=72 for more information on eligibility requirements

Sign up now

CSQ Enrolment Form SCG

Training Enrolment Form (NON FUNDED)

What competencies will be delivered in the course?

Core Units

UEENEEK125A Solve basic problems in photovoltaic energy apparatus and systems

UEENEEK135A Design grid connected photovoltaic power supply systems

UEENEEK148A Install, configure and commission LV grid connected photovoltaic power systems

*Students will complete with a statement of attainment

Design Only (Solar)

Design Only (Solar)

Pre-Requisites:

Not Applicable

Course Duration:

Three Day Course

Course Dates:

Brisbane – Rocklea Campus

Please select the following for course dates

http://www.electrogroup.com.au/new-course-dates-2018/

Rockhampton Campus

TBC

Course Fee:

$680 If you are Eligible for CSQ Funding (CSQ will fund $480)

Full Fee $1,340 – If you are NOT Eligible for Funding

Fee is calculated through a Construction Skills Queensland (CSQ) funded subsidy of $480. Conditions apply to eligible applicants.

Go to http://www.csq.org.au/search/courses?id=49&v=72 for more information on eligibility requirements

Sign up now

CSQ Enrolment Form SCG  Training Enrolment Form (NON FUNDED)

What competencies will be delivered in the course?

Core Units

UEENEEK125A Solve basic problems in photovoltaic energy apparatus and systems

UEENEEK135A Design grid connected photovoltaic power supply systems

*Students will complete with a statement of attainment.

Certificate IV in Hazardous Areas — Electrical

Nationally_Recognised_TrainingUEE42611

Certificate IV in Hazardous Areas — Electrical

This course is designed to give participants knowledge and practical skills for installing and maintaining electrical equipment in hazardous areas. The course covers competencies in the installation, maintenance and testing of equipment in hazardous areas as well as procedures to attend to breakdowns. You will be required to complete additional work in your own time on top of your face to face attendance to achieve this Certificate.

Pre-Requisites:

Must be a holder of a Nationally Recognised Unrestricted Electrical license OR an Instrumentation trade Certificate III in Instrumentation and Control. If you have previously completed Certificate IV in Electrical—Instrumentation, units may be credited to the Certificate IV Hazardous Areas Electrical. Please Contact us to discuss these options. An entry requirement is that participants must hold a current unrestricted electrical license.

Course Duration:

Five day on campus attendance (plus additional work in own time)

Course Dates:

Brisbane – Rocklea Campus

Please select the following for course dates

http://www.electrogroup.com.au/new-course-dates-2018/

Rockhampton Campus

TBC

Course Fee:

$200 – If you are Eligible for CSQ Funding – (CSQ will fund the remaining $1,500)

$1,700 If you are NOT Eligible for CSQ Funding

 

 

Fee is calculated through a Construction Skills Queensland (CSQ) funded subsidy of $1, 500. Conditions apply to eligible applicants. Conditions apply to eligible applicants. Go to http://www.csq.org.au/for-current-workers/higher-level-skills for more information on eligibility requirements.

Sign up now

CSQ Enrolment Form HLS

Training Enrolment Form (NON FUNDED)

What competencies will be delivered in the course?

Core Units

UEENEEE038B Participate in development and follow a personal competency development plan

UEENEEE101A Apply Occupational Health and Safety regulations, codes and practices in the workplace

UEENEEE102A Fabricate, assemble and dismantle utilities industry components

UEENEEE104A Solve problems in d.c. circuits

UEENEEE105A Fix and secure electrotechnology equipment

UEENEEE107A Use drawings, diagrams, schedules, standards, codes and specifications

UEENEEE117A Implement and monitor energy sector OHS policies and procedures

UEENEEE124A Compile and produce an energy sector detailed report

UEENEEE137A Document and apply measures to control OHS risks associated with electrotechnology work

UEENEEG006A Solve problems in single and three phase low voltage machines

UEENEEG033A Solve problems in single and three phase low voltage electrical apparatus and circuits

UEENEEG063A Arrange circuits, control and protection for general electrical installations

UEENEEG101A Solve problems in electromagnetic devices and related circuits

UEENEEG102A Solve problems in low voltage a.c. circuits

UEENEEG103A Install low voltage wiring and accessories

UEENEEG104A Install appliances, switchgear and associated accessories for low voltage electrical installations

UEENEEG105A Verify compliance and functionality of low voltage general electrical installations

UEENEEG106A Terminate cables, cords and accessories for low voltage circuits

UEENEEG107A Select wiring systems and cables for low voltage general electrical installations

UEENEEG108A Trouble-shoot and repair faults in low voltage electrical apparatus and circuits

UEENEEG109A Develop and connect electrical control circuits

UEENEEK145A Implement and monitor energy sector environmental and sustainable policies and procedures

UEENEEM080A Report on the integrity of explosion-protected equipment in a hazardous area

Electives

UEENEEM039A Conduct testing of hazardous areas installations – gas atmospheres

UEENEEM040A Conduct testing of hazardous areas installations – dust atmospheres

UEENEEM041A Conduct testing of hazardous areas installations – pressurization

UEENEEM042A Conduct visual inspection of hazardous areas installations

UEENEEM044A Conduct detailed inspection of hazardous areas installations – gas atmospheres

UEENEEM045A Conduct detailed inspection of hazardous areas installations – dust atmospheres

UEENEEM046A Conduct detailed inspection of hazardous areas installations – pressurization

UEENEEM020A Attend to breakdowns in hazardous areas – gas atmospheres

*Students will complete with a Certificate and statement of attainment

Working Safely at Heights

                 

 

       RIIWHS204D

 

 

Working Safely at Heights

Work Safely at Heights one day course is designed for anyone who is required to undertake routine procedures involving working at height. The course is designed for students who work at height to a broad range of height risk situations and to correctly implement a safe working procedure. The successful student will be competent to work at height using applicable fall protective equipment.

Language Literacy and Numeracy as required to work safely at heights in the workplace and complete workplace documentation. Students must be physically capable of climbing a ladder safely maintaining three points of contact.

Pre-Requisites:

Not Applicable

Course Duration:

One day Course

Course Dates:

Please select the following link for course dates

http://www.electrogroup.com.au/new-course-dates-2018/

Course Fee:

$15– If you are Eligible for CSQ Funding (CSQ will fund $225)

$240 Full Fee – If you are NOT Eligible for Funding

 

 

Fee is calculated through a Construction Skills Queensland (CSQ) funded subsidy of $225. Conditions apply to eligible applicants.

Go to http://www.csq.org.au/search/courses?id=49&v=72 for more information on eligibility requirements

Sign up now

CSQ Enrolment Form SCC

Training Enrolment Form (NON FUNDED)

What competencies will be delivered in the course?

Core Units

RIIWHS204D – Work safely at heights

*Students will complete with a card and a statement of attainment.

Cardiopulmonary Resuscitation (CPR) & Low Voltage Switchboard Recuse (LVR) REFRESHER

Cardiopulmonary Resuscitation (CPR) & Low Voltage Switchboard Recuse (LVR) REFRESHER

Training and assessment of this essential skill set for all electricians and trades assistants. All students involved in electrical work which is required to maintain skill levels in low voltage rescue procedures as part of their duties. This CPR & LVR course is specifically designed to provide students with the knowledge and practical skills to perform a safe rescue of a casualty who has received an electric shock or other injuries while working on low voltage conductors or equipment (LVR).

The current Electrical Safety Act requires competency acquisition every 12 months.

Pre-Requisites:

A copy of your current CPR/LVR Card or Certificate/Statement of Attainment.

**Must have completed an initial CPR/LVR as this is a refresher course only.

Course Dates and Duration:

Rocklea Campus

Every Wednesday Afternoon

4:00pm Start (1-2 Hours)

Rockhampton Campus

The first Wednesday of every month (Please call our Rockhampton Office to organise a booking on 4291 0744)

Course Fee:

CPR/LVR $70

CPR ONLY $50

GROUP BOOKINGS AVAILABLE – Call us today to discuss group booking rate discounts.

Sign up now

Training Enrolment Form (NON FUNDED)

 

*Students will complete with a CPR/LVR Card for Refresher course

Legislation and Verification Refresher

Legislation and Verification Refresher

This non accredited industry endorsed and Electrical Trades Union (ETU) approved course is designed to refresh your knowledge of current Queensland regulations and correct testing procedures for low voltage installations including polarity and fault loop impedance.

  • The program involves a significant degree of hands on practical and testing of a range of real world and simulated installations within our Skills Centre.
  • A workbook is also used to further develop your skills and understanding.

Pre-Requisites:

All applicants must hold a current Full Electrical License

Course Duration:

4 hour course

10am-2pm

Course Dates:

Please select the following link for course dates

http://www.electrogroup.com.au/new-course-dates-2018/

Sign up now:

Training Enrolment Form (NON FUNDED)

Course Fee:

Employees – $130 per person – If eligible the full cost can be reimbursed through JETCO funding (see below link for details)

http://www.cirt.com.au/jetco-training/employees

Employers – $130 per person – If eligible 50% ($65) can be reimbursed through JETCO funding (see below link for details)

http://www.cirt.com.au/jetco-training/employers

*Students will complete with a Legislation Testing and Fault Finding card.

Construction Wiring Program (CWP)

Construction Wiring Program (CWP)

The course is intended for licensed electrical mechanics that work in the construction industry and perform electrical installations at construction and demolition sites. Participants will learn the minimum requirements for the design, construction and testing of electrical installations that supply electricity to appliances and equipment, and for the in-service testing of portable, transportable and fixed electrical equipment used on construction and demolition sites.

The course is designed to cover the requirements of Australian Standard AS/NZS 3012:2010, Electrical installations – Construction and demolition sites and relevant sections of referenced standards such as AS/NZS 3000, Wiring Rules, and AS/NZS 2293 Emergency Lighting, ASNZS 3439 Low-voltage switchgear and controlgear assemblies.

Pre-Requisites:

Not Applicable

Course Duration:

Two day Course

Course Dates:

Please select the following link for course dates

http://www.electrogroup.com.au/new-course-dates-2018/

Course Fee:

$220– If you are Eligible for CSQ Funding (CSQ will fund $180)

$400 Full Fee – If you are NOT Eligible for Funding

 

 

Fee is calculated through a Construction Skills Queensland (CSQ) funded subsidy of $180. Conditions apply to eligible applicants.

Go to http://www.csq.org.au/search/courses?id=49&v=72 for more information on eligibility requirements

Sign up now

CSQ Enrolment Form SCG

Training Enrolment Form (NON FUNDED)

What topics will be covered in this course?

  • Principles of AS/NZS 3000:2010
  • Legislative requirements
  • Installation of construction wiring
  • Switchboard construction, installation, control and protection
  • Lighting and Luminaires
  • Lift Shafts
  • Transportable Structures
  • Verification (Inspection and Testing)
  • Portable Generators
  • Inverters
  • Documentation
  • Flexible extension cords, cables and accessories
  • Earth Leakage Protection
  • Protection of Final Sub-Circuits
  • Periodic Inspection of Tools and Plant

*Students will complete with a card.